Coxreels 8954 Bearing Assembly for Inline 1185 Reels — UnitedBuilt Equipment Skip to content
Quality Water Truck Systems, Tanks & Parts Since 1947
Quality Water Truck Systems, Tanks & Parts Since 1947
Bearing Assembly 1.5" 1185 Inline, COXREELS 8954 (REEL8954) - UnitedBuilt Equipment

Coxreels 8954 Inline Swivel-Side Bearing Assembly for 1185 Reels

SKU 0009749
Brand Coxreels
Availability:
6 in stock | Available on backorder
$0.00 - $0.00
$0.00
$81.50
$81.50 - $81.50
$81.50

Product Images

Images are for representation only and may differ from the actual product.

Questions about this product?

Coxreels 8954 bearing assembly supports the axle at the inline-swivel end of compatible 1185 hose reels, including 1185-1124 and 1185-2024 hand-crank reels and their motorized versions. Its housing receives the flanged end of the matching inline swivel. One bearing assembly is supplied; the swivel, retaining plate, washers, rings and mounting hardware are separate components.

An inline 1185 reel uses different bearing assemblies at opposite ends. Match the existing swivel-side assembly before ordering: 8954 is the inline-swivel selection, while 8166 serves a different position and is used at both ends of the optional 90-degree-swivel arrangement.

Support the matching axle and swivel

Feature Benefit
Swivel-side bearing assembly Supports the axle and locates the flanged inline swivel within the bearing housing.
Replaceable assembly Allows a targeted repair when the surrounding reel components remain serviceable.

Technical specifications

Specification Detail
Manufacturer and part Coxreels 8954
Component Inline-swivel-side bearing assembly
Reel family 1185 with the matching inline axle and swivel
Typical models 1185-1124 and 1185-2024, including motorized versions with matching inline components
Quantity per compatible reel One 8954 assembly
Separate related parts 8970-family swivel, 8956 retaining plate, 8960 and 8960-1 washers, 20252 retaining rings and hardware

Before ordering

Check Requirement
Existing assembly Confirm complete reel model, revision and swivel configuration. Check the bearing at the swivel end; do not substitute by appearance or plumbing size alone.
Older or modified reels Verify the installed axle and swivel match the 8954 arrangement before ordering.
Safe service Have qualified personnel disconnect the pressure supply, release line pressure and isolate any motor drive before service. Follow the applicable reel assembly drawing.
Installation checks Align the bearing blocks, fully seat retaining rings, and fit the thrust washer with its coated side outward. Maintain the required 1/16- to 1/8-inch clearance at the opposite bearing-block end.
Related wear Inspect the separate washers, rings, swivel seals and hardware before reassembly; replace worn parts as needed.

Need help confirming the correct bearing assembly? Contact UnitedBuilt through online chat, email parts@unitedbuilt.com, or call 602-253-7750 with your reel model, revision and photos of the swivel-side bearing.