2404-16-12 | Straight rigid adapter | UnitedBuilt — UnitedBuilt Equipment Skip to content
Quality Water Truck Systems, Tanks & Parts Since 1947
Quality Water Truck Systems, Tanks & Parts Since 1947
Hydraulic Fitting, Straight Adapter, Rigid, 16 Male JIC 37° Flare x 12 (3/4") Male NPTF, Steel, 2404 - 16 - 12 - UnitedBuilt Equipment

UnitedBuilt Choice Hydraulic Straight rigid adapter, -16 Male JIC x -12 Male NPTF – 2404-16-12

SKU 0012651
Brand UnitedBuilt Choice
Availability:
7 in stock | Available on backorder
$0.00 - $0.00
$0.00
$7.50
$7.50 - $7.50
$7.50

Product Images

Images are for representation only and may differ from the actual product.

Questions about this product?

The UnitedBuilt Choice 2404-16-12 is a straight rigid adapter with -16 Male JIC x -12 Male NPTF. Use it to join the specified hydraulic connection types without changing the mating equipment ports.

Compare both the fitting end and its mating connection, including thread form, size and sealing surface. Dash sizes describe nominal connection sizes; they are not the measured outside diameter of the thread. This listing is for the adapter, not a complete hose assembly.

Match the connection to the job

The straight configuration connects the two ends in line, so hose routing and access can be planned around the existing ports.

Feature Benefit
Connection-specific design Select by the complete end type and dash-size combination, not by appearance alone.
Straight rigid adapter Matches the stated connection layout when the port clearance and mating parts are correct.
37-degree flare connection Mates to the matching JIC seat; the threads draw the sealing surfaces together.

Technical specifications

Specification Detail
Brand UnitedBuilt Choice
Part number 2404-16-12
Series 2404
Configuration Straight rigid adapter
End 1 Male JIC 37-degree flare; -16 (1 inch tube OD)
End 1 thread 1-5/16-12
End 2 Male NPTF; -12 (3/4 inch nominal pipe size)
End 2 thread 3/4-14

Before ordering

Confirm the supplied fitting's pressure and temperature limits, material compatibility and suitability for the hydraulic fluid before installation. A series number and dash size do not establish those ratings. Isolate and depressurize the circuit before work, and follow the equipment and fitting supplier's installation procedure.

Check What to confirm
End 1 mating part Corresponding female 37-degree JIC. Metal-to-metal mating 37-degree flare surfaces; the parallel threads provide clamping, not the fluid seal.
End 2 mating part Corresponding female NPT/NPTF port. Tapered dryseal pipe-thread interference. Confirm mating pipe-thread standard and the supplier-approved assembly/sealant procedure; do not treat this as JIC or ORB.
Inspection Check threads, sealing surfaces and any O-ring for damage or contamination. Do not force an incompatible thread or seat.

Need help selecting the correct adapter? Contact UnitedBuilt through online chat, email parts@unitedbuilt.com, or call 602-253-7750 with your connection sizes, existing fitting number and application.