The UnitedBuilt S23009MS external retaining ring fits a groove on a nominal 1-1/8" shaft. The portion projecting beyond the groove forms a shoulder that restrains components from moving along the shaft.
This stainless steel ring installs axially over the shaft. Match the ring’s thickness and mating groove dimensions as well as the nominal shaft size.
Retain Components at the Shaft Groove
| Feature |
Benefit |
| External groove mounting |
Forms an axial retaining shoulder. |
| Axial installation |
Fits over the shaft into its retaining groove. |
| Lug holes |
Allow installation and removal with a suitable retaining-ring tool. |
Technical Specifications
| Specification |
Detail |
| Brand / reference |
UnitedBuilt S23009MS |
| Material |
Stainless steel |
| Nominal shaft diameter |
1-1/8" |
| Ring thickness |
0.048–0.052" |
| Free inside diameter |
1.026–1.051" |
| Mating groove diameter |
1.055–1.063" |
| Mating groove width |
0.056–0.060" |
Pump and component selection
| Application |
Selection |
| B80699MS shaft kit |
Clockwise mechanical seal; B68417MS pump. |
| B80697MS shaft kit |
Counterclockwise mechanical seal; B68416MS pump. |
| Separate retaining ring |
S23010MS serves position 816B; S23009MS serves 816A. |
Before Ordering
| Check |
Guidance |
| Size |
Do not substitute the 1-3/16" S23010MS ring. |
| Groove |
Compare groove diameter and width with the specified ranges. |
| Application |
Confirm the required ring material and assembly position. |
| Installation |
Use the correct tool and verify complete groove seating before operation. |
Need help selecting your retaining ring? Contact UnitedBuilt through online chat, email parts@unitedbuilt.com, or call 602-253-7750 with your equipment model, existing ring number, or photos.