The UnitedBuilt S23010MS external retaining ring seats in an external groove on a nominal 1-3/16" shaft. Its projecting shoulder helps retain components against movement along the shaft.
This is a different size from the S23009MS ring for a 1-1/8" shaft. Check the groove dimensions and required assembly position rather than selecting by appearance alone.
Locate Components Along the Shaft
| Feature |
Benefit |
| External retaining shoulder |
Restrains axial component movement. |
| Axial installation |
Fits over the shaft into the groove. |
| Lug holes |
Provide engagement for a suitable retaining-ring tool. |
Technical Specifications
| Specification |
Detail |
| Brand / reference |
UnitedBuilt S23010MS |
| Component |
External retaining ring |
| Nominal shaft diameter |
1-3/16" |
| Ring thickness |
0.048–0.052" |
| Free inside diameter |
1.083–1.108" |
| Mating groove diameter |
1.114–1.122" |
| Mating groove width |
0.056–0.060" |
Before Ordering
| Check |
Guidance |
| Shaft size |
Confirm the required nominal diameter is 1-3/16". |
| Groove |
Compare groove width and diameter with the specified ranges. |
| Clearance |
Check access for the retaining-ring tool and installed ring. |
| Installation |
Follow the equipment instructions and verify complete groove seating. |
Need help matching your retaining ring? Contact UnitedBuilt through online chat, email parts@unitedbuilt.com, or call 602-253-7750 with your equipment model, existing ring number, or photos.