In-stock parts
Order by 2PM MST
In-stock parts
Order by 2PM MST
Images are for representation only and may differ from the actual product.
Usually ready in 2 hours
2045 West Buckeye Road
Phoenix AZ 85009
United States
The Elkhart Brass 41067000 joystick controller provides up, down, left, and right monitor movement plus electric nozzle stream-to-fog control for the Nitro HD 8100HD system. Its maintained trigger supplies an external switching function.
The joystick may be surface-mounted in its enclosure or flush-mounted. It is not a sealed component and must be installed inside a cab or protected compartment away from water and other liquids.
| Control | Function |
|---|---|
| Joystick fore/aft | Monitor down/up movement |
| Joystick left/right | Horizontal monitor movement |
| Top rocker switch | Nozzle stream/fog adjustment |
| Maintained trigger | External switching input for a valve or auxiliary device |
| Specification | Value |
|---|---|
| Manufacturer | Elkhart Brass |
| Part number | 41067000 |
| Product type | Nitro HD joystick controller |
| Approximate enclosure dimensions | 6.09 in long x 4.88 in wide x 4.80 in high |
| Store SKU | 0009881 |
| Connection | Guidance |
|---|---|
| Harness | Connect to the gray six-position plug of harness 37523000 |
| Extension | Use 37527000 on the joystick side when more length is required |
| Trigger output | Switching function only; it does not directly control a relay |
| System module | Requires the compatible Nitro HD control module and monitor system |
| Check | Guidance |
|---|---|
| Environment | Mount inside a cab or protected compartment; joystick is not sealed |
| Orientation | Treat the trigger side as the front for directional operation |
| Power | Disconnect system power before wiring |
| Auxiliary relay | Match relay voltage and wiring to the installed 12/24 VDC system |
| Clearance | Confirm the joystick can move freely |
| Function test | Verify all movement, nozzle, and trigger functions |
| Weight | 1.8 lb |
|---|