Hose Fittings

Dixon STV King combination nipples connect a hose shank to a grooved-end connection in low-pressure liquid suction or discharge service. These STV ...

Dixon ST King combination nipples connect a hose to a matching female NPT pipe connection. These unplated-steel fittings are intended for low-press...

Dixon TBC T-bolt hose clamps use a 300-series stainless-steel band with an alloy-steel bolt. Select the clamp by the measured outside diameter of t...

King Combination Nipple, Weld by Hose Barb Applications Recommended for low-pressure discharge and suction service for compatible liquids ...

Hose Clamp, Center Punch Band Clamp Pre-formed, Galvanized Steel, Dixon F-SeriesSize indicates Clamp ID.For use with center punch clamp tools F1, F...

The Dixon 400 double-bolt hose clamp with saddles fits hose outside diameters from 3-1/2 to 3-13/16 inches. Its plated-iron construction and two-bo...

The Dixon DMH2525F is a cast-brass adapter for connecting a female NPT port and a female NST (NH) hose coupling. Its ends are 2-1/2-inch male NPT a...

The Dixon DFVS30 foot valve fits the intake end of a water suction hose to help keep a pump primed between pumping cycles. This 2-1/2-inch NPT valv...

Adjustable Hydrant Wrench, Plated Iron, Dixon AHWFeatures• Fits 3/4" to 3" rocker lug and pin lug couplings• A compact wrench easily carried in you...

The Dixon 525 double-bolt hose clamp with saddles fits hose outside diameters from 4-1/4 to 4-15/16 inches. Its plated-iron construction and two-bo...

Foot Valve, Cast Iron, 3" FNPT, Dixon DFVS35

The Dixon FM25F25T hex adapter connects a 2-1/2-inch male NPT pipe end to a 2-1/2-inch female NST (NH) hose connection. It is a cast-brass female-t...

Dixon DMH1515F is a cast-brass hex adapter with 1-1/2-inch male NPT on one end and 1-1/2-inch male NST (NH) on the other. It joins the correspondin...

The Dixon RHS35 3-inch round-hole suction strainer fits at the submerged end of a suction hose to help keep debris out of the pump. Its zinc-plated...

The Dixon RSS35 3-inch long thin round-hole suction strainer fits at the submerged end of a suction hose to help keep debris out of the pump. Its z...

Adjustable hydrant wrench, AW1Fits 3/4" to 3" rocker lug and pin lug couplings Length: 16-1/4"

The Dixon FM2525F is a cast-brass adapter for connecting a male NPT pipe fitting and a female NST (NH) hose coupling. Its ends are 2-1/2-inch femal...

The Dixon SF250F is a cast-brass adapter for connecting a male NPT pipe fitting and a male NST (NH) hose fitting. Its ends are 2-1/2-inch female NP...

The Dixon SM250F pin-lug adapter connects a 2-1/2-inch male NPT pipe end to a 2-1/2-inch female NST (NH) swivel hose connection. The adapter is cas...

Hydrant Adapter 2-1/2" MNPT x 2-1/2" Female City of Phoenix Thread 2-1/2" MNPT 2-1/2" Female City of Phoenix Thread

The Dixon FM25F20T brass hydrant adapter joins a 2-1/2-inch male NST (NH) connection to a 2-inch female NPT connection. Its female NST end and male...

Protective cap only. Not for pressure applications.The Dixon FC150F pin-lug cap covers a matching 1-1/2-inch male NST (NH) connection when protecti...

For protection only — not intended for pressure applications.The Dixon FP250F pin-lug plug covers a compatible 2-1/2-inch female NST (NH) connectio...

For protection only — not intended for pressure applications.The Dixon FC250F pin-lug cap covers a compatible 2-1/2-inch male NST (NH) connection w...