Camozzi P6510 04-04 Male Connector | 1/4" Tube — UnitedBuilt Equipment Skip to content
Quality Water Truck Systems, Tanks & Parts Since 1947
Quality Water Truck Systems, Tanks & Parts Since 1947
Push - In Air Fitting, Male Connector, 1/4" Tube OD X 1/4" Male NPTF, Camozzi P6510 04 - 04 - UnitedBuilt Equipment
Push-In Air Fitting, Male Connector, 1/4" Tube OD X 1/8" NPTF, Camozzi P6510 04-02 - UnitedBuilt Equipment
Push - In Air Fitting, Male Connector, 1/4" Tube OD X 1/4" Male NPTF, Camozzi P6510 04 - 04 - UnitedBuilt Equipment
Push-In Air Fitting, Male Connector, 1/4" Tube OD X 1/8" NPTF, Camozzi P6510 04-02 - UnitedBuilt Equipment

Camozzi P6510 04-04 Male Connector, 1/4" Tube OD x 1/4" male NPTF

SKU 0012570
Brand Camozzi
Availability:
36 in stock | Available on backorder
$0.00 - $0.00
$0.00
$2.92
$2.92 - $2.92
$2.92

Product Images

Images are for representation only and may differ from the actual product.

Questions about this product?

The Camozzi P6510 04-04 male straight connects 1/4-inch outside-diameter pneumatic tubing to a 1/4" male NPTF connection. Connects pneumatic tubing directly to a threaded port.

Use this Series 6000 inch fitting when repairing or routing compatible compressed-air control lines, including pneumatic controls on water truck equipment. Match the exact tube diameter and fitting layout to your system; 1/4-inch OD tubing is not interchangeable with 6 mm tubing. The pipe-thread size is a separate nominal size, not the tube outside diameter.

Simple connections for pneumatic tube routing

The push-in connection helps simplify tube changes during installation and service. Select this male straight for the connection direction and number of air lines you need, rather than adding an unrelated adapter to change the layout.

Feature Benefit
Push-in tube connections Connect and release compatible tubing without a compression nut.
Male straight Connects pneumatic tubing directly to a threaded port.
Nickel-plated brass body and collet Provides a metal fitting for compatible pneumatic control-line connections.
Pro-Fit thread sealing ring A PTFE ring is provided at the threaded connection.

Technical specifications

Specification Details
Manufacturer Camozzi
Manufacturer part number P6510 04-04
Series 6000 inch / Pro-Fit
Configuration Male straight
Tube outside diameter 1/4 inch
Push-in tube ports 1
Pipe thread 1/4" male NPTF
Body and collet Nickel-plated brass
Standard O-ring NBR
Medium Compressed air
Operating pressure — North American inch configuration 0–250 PSI; selected tubing and system-component limits also apply.

Before ordering

Check Selection guidance
Tube selection Confirm 1/4-inch OD and a compatible pneumatic tube material; check the tubing pressure and temperature limits.
Connection layout Match 1/4" male NPTF and the required male straight arrangement. Do not substitute BSP thread.
Operating conditions Do not exceed 250 PSI or the lower pressure limit of the selected tubing and other system components. Confirm temperature compatibility and any applicable tubing derating before use.
Application Use for compatible pneumatic controls; do not assume air-brake certification or suitability for water or hydraulic service.
Installation Isolate and depressurize the circuit before disconnecting tubing. Follow the fitting and equipment installation instructions.

Need help selecting the correct air fitting? Contact UnitedBuilt through online chat, email parts@unitedbuilt.com, or call 602-253-7750 with your tube size, threaded connection, and application.