Buyers RT25812 2-Inch Weld-On Receiver Tube — UnitedBuilt Equipment Skip to content
Quality Water Truck Systems, Tanks & Parts Since 1947
Quality Water Truck Systems, Tanks & Parts Since 1947
Receiver Tube, Weld On, 2" x 12" Shank, Bare Unpainted, Buyers RT25812 - UnitedBuilt Equipment

Buyers RT25812 2-Inch Weld-On Receiver Tube, 12-Inch Shank

SKU 0011858
Brand Buyers
Availability:
3 in stock | Available on backorder
$0.00 - $0.00
$0.00
$50.00
$50.00 - $50.00
$50.00

Product Images

Images are for representation only and may differ from the actual product.

The Buyers Products RT25812 is a weld-on receiver tube with a 2-inch inside opening and 12-inch shank. It provides a receiver-mount foundation for compatible towing equipment and custom vehicle fabrication.

The unfinished carbon-steel tube can be welded into a properly designed mounting structure and may be cut when a shorter custom length is required. A cast-steel collar and solid stress-collar opening reinforce the receiver end.

Key Features

Feature Details
Weld-On Configuration Designed for integration into a properly engineered mounting structure
2-Inch Receiver Opening Accepts compatible 2-inch receiver-mounted equipment
12-Inch Shank Provides material for installation or approved custom-length fabrication
Cast-Steel Collar Reinforces the receiver opening
Hitch-Pin Hole Includes a 5/8-inch pin opening
Unfinished Tube Can be prepared and finished as required after fabrication

Product Specifications

Specification Details
Manufacturer Buyers Products
Manufacturer part number RT25812
Product type Weld-on receiver tube
Receiver opening 2 in.
Shank length 12 in. nominal
Mounting type Weld-on
Hitch-pin hole 5/8 in.
Primary material Carbon steel
Collar Cast steel
Store SKU 0011858

Published Physical Details

Attribute Published value
Overall length Approximately 12.3 in.
Overall width Approximately 3.05 in.
Overall height Approximately 3.05 in.
Published product weight Approximately 7.04 lb
Receiver-tube inside opening 2 in.
Pin-hole diameter Approximately 0.656 in.

Installation and Selection Checks

Check Requirement
Mounting structure Must be suitable for a welded receiver installation
Receiver accessory Must fit a 2-inch receiver opening
Hitch pin Must match the 5/8-inch pin-hole configuration
Welding Should be completed by a qualified fabricator
Surface protection Apply an appropriate coating after fabrication when required
Vehicle and towing limits Must be established from the complete installed system
Ball mount, hitch pin, and clip Not included unless separately specified

Selection note: Verify receiver size, mounting structure, weld design, intended accessory, and the capacities of every component in the completed towing system. No towing-capacity claim is made because the available manufacturer materials do not provide a sufficiently clear product-specific rating.