Elkhart 41067000 Nitro HD Joystick Controller — UnitedBuilt Equipment Skip to content
Quality Water Truck Systems, Tanks & Parts Since 1947
Quality Water Truck Systems, Tanks & Parts Since 1947
Joystick Controller, Nitro HD, Elkhart 41067000 - UnitedBuilt Equipment

Elkhart 41067000 Nitro HD Joystick Controller

SKU 0009881
Brand Elkhart Brass
Availability:
2 in stock | Available on backorder
Save 19% Save 19%
$1,895.00
$1,895.00 - $1,895.00
$1,895.00
$1,535.00
$1,535.00 - $1,535.00
$1,535.00

Product Images

Images are for representation only and may differ from the actual product.

The Elkhart Brass 41067000 joystick controller provides up, down, left, and right monitor movement plus electric nozzle stream-to-fog control for the Nitro HD 8100HD system. Its maintained trigger supplies an external switching function.

The joystick may be surface-mounted in its enclosure or flush-mounted. It is not a sealed component and must be installed inside a cab or protected compartment away from water and other liquids.

Control Functions

Control Function
Joystick fore/aft Monitor down/up movement
Joystick left/right Horizontal monitor movement
Top rocker switch Nozzle stream/fog adjustment
Maintained trigger External switching input for a valve or auxiliary device

Product Specifications

Specification Value
Manufacturer Elkhart Brass
Part number 41067000
Product type Nitro HD joystick controller
Approximate enclosure dimensions 6.09 in long x 4.88 in wide x 4.80 in high
Store SKU 0009881

System Connections

Connection Guidance
Harness Connect to the gray six-position plug of harness 37523000
Extension Use 37527000 on the joystick side when more length is required
Trigger output Switching function only; it does not directly control a relay
System module Requires the compatible Nitro HD control module and monitor system

Installation and Safety Checks

Check Guidance
Environment Mount inside a cab or protected compartment; joystick is not sealed
Orientation Treat the trigger side as the front for directional operation
Power Disconnect system power before wiring
Auxiliary relay Match relay voltage and wiring to the installed 12/24 VDC system
Clearance Confirm the joystick can move freely
Function test Verify all movement, nozzle, and trigger functions