The UnitedBuilt Choice 6602-12-12-12 is a swivel run tee with -12 Male JIC x -12 Female JIC swivel x -12 Male JIC. Match the run and branch positions to your hose or port layout before selecting the tee.
Compare both the fitting end and its mating connection, including thread form, size and sealing surface. Dash sizes describe nominal connection sizes; they are not the measured outside diameter of the thread. This listing is for the adapter, not a complete hose assembly.
Match the connection to the job
The tee provides three connection points in the stated arrangement. Check which connection is on the branch and which two form the run; a matching dash size alone does not make another tee arrangement interchangeable.
| Feature |
Benefit |
| Connection-specific design |
Select by the complete end type and dash-size combination, not by appearance alone. |
| Swivel run tee |
Matches the stated connection layout when the port clearance and mating parts are correct. |
| 37-degree flare connection |
Mates to the matching JIC seat; the threads draw the sealing surfaces together. |
Technical specifications
| Specification |
Detail |
| Brand |
UnitedBuilt Choice |
| Part number |
6602-12-12-12 |
| Series |
6602 |
| Configuration |
Swivel run tee |
| Run |
Male JIC 37-degree flare; -12 (3/4 inch tube OD) |
| Run thread |
1-1/16-12 |
| Run |
Female JIC 37-degree flare swivel; -12 (3/4 inch tube OD) |
| Run thread |
1-1/16-12 |
| Branch |
Male JIC 37-degree flare; -12 (3/4 inch tube OD) |
| Branch thread |
1-1/16-12 |
Before ordering
Confirm the supplied fitting's pressure and temperature limits, material compatibility and suitability for the hydraulic fluid before installation. A series number and dash size do not establish those ratings. Isolate and depressurize the circuit before work, and follow the equipment and fitting supplier's installation procedure.
| Check |
What to confirm |
| Run mating part |
Corresponding female 37-degree JIC. Metal-to-metal mating 37-degree flare surfaces; the parallel threads provide clamping, not the fluid seal. |
| Run mating part |
Corresponding male 37-degree JIC. Metal-to-metal mating 37-degree flare surfaces; the parallel threads provide clamping, not the fluid seal. |
| Branch mating part |
Corresponding female 37-degree JIC. Metal-to-metal mating 37-degree flare surfaces; the parallel threads provide clamping, not the fluid seal. |
| Inspection |
Check threads, sealing surfaces and any O-ring for damage or contamination. Do not force an incompatible thread or seat. |
| Swivel use |
Use for assembly positioning only unless the supplied fitting is specifically rated for live rotary service. |
Need help selecting the correct adapter? Contact UnitedBuilt through online chat, email parts@unitedbuilt.com, or call 602-253-7750 with your connection sizes, existing fitting number and application.
