Hose and mounting hardware are not included.
The Coxreels 1175-6-150 hand-crank hose reel holds up to 150 feet of 1-inch I.D. hose with a 1-7/16-inch O.D. capacity reference. Its 1-inch female NPT inlet and outlet connect the hose to a full-flow swivel, and the reel is rated for a maximum of 3,000 PSI. Choose this 150-foot-capacity model when your work area calls for a longer hose run and your mounting area can accommodate its wider frame.
This 1175 Series reel is a practical selection for compatible water-truck hose systems, construction-site watering, and equipment service. Manual rewind needs no electrical or air supply. The operator turns the direct hand crank and guides the hose across the drum so each layer stores evenly.
Manual hose handling with a stable steel frame
The welded A-frame supports the drum, while self-aligning pillow block bearings keep it turning smoothly. A low-profile outlet riser helps the first hose wraps sit flat instead of building around a raised connection. The adjustable tension brake adds drag during payout, and the locking pin secures the reel for storage or transport.
| Feature |
Benefit |
| Direct hand crank |
Rewind the hose without adding a motor or power connection. |
| Adjustable tension brake |
Control free-wheeling as hose is pulled from the drum. |
| Locking pin |
Secure the drum against rotation for storage or transport. |
| Low-profile outlet riser |
Help hose wrap evenly from the first layer. |
| External swivel |
Service the swivel seals without removing the reel from its mount. |
| Welded steel A-frame |
Provide a permanent mounting base for the reel assembly. |
Technical specifications
| Specification |
Details |
| Manufacturer part number |
1175-6-150 |
| Series and rewind |
1175 Series; direct hand crank |
| Standard hose capacity |
150 ft of 1-inch I.D. hose at 1-7/16-inch O.D. |
| Maximum reel pressure |
3,000 PSI |
| Inlet and outlet |
1-inch female NPT; 90-degree swivel inlet |
| Swivel and seals |
Nickel-plated steel swivel with AFLAS seals |
| Overall size |
32.13 in. W × 26.13 in. H × 24 in. L |
| Mounting pattern |
18.81 in. M × 13.75 in. N |
| Base dimensions |
21 in. X × 20.13 in. Y |
| Drum width |
15.5 in. |
| Frame and finish |
Steel with CPC powder-coat finish |
| Country of manufacture |
USA |
Select the hose and installation components
Hose outside diameter matters as much as nominal inside diameter. A thicker hose may reduce usable length, and uneven winding can keep the full rated length from fitting. Select the hose, fittings, and swivel seals for the fluid and operating temperature as well as pressure.
| Component |
Selection |
| Included reel |
Reel assembly with direct crank, swivel, brake, and locking pin. |
| Working hose |
Supply separately to suit the application and rated drum capacity. |
| Alternative hose capacity |
Up to 250 ft of 3/4-inch I.D. hose at 1-1/4-inch O.D.; reducer required. |
| Inlet connection |
Use a flexible supply hose that does not side-load the swivel. |
| Optional accessories |
Select roller guides or other accessories for this exact reel and drum width. |
Before ordering
| Check |
What to confirm |
| Hose dimensions |
Confirm actual I.D., O.D., length, and minimum bend radius for the 1175-6-150. |
| Pressure and fluid |
Stay within the lowest rating of the reel, hose, fittings, and system components; confirm AFLAS compatibility. |
| Mounting space |
Check the full reel envelope, crank operating clearance, and hose routing. |
| Mounting hardware |
Provide fasteners and a structure appropriate for the loaded reel and installation. |
| First hose installation |
Fully extend and charge the hose before its initial winding; follow the installation manual. |
| Safe service |
Isolate the pressure supply and release line pressure before maintenance; inspect connections and mounting hardware regularly. |
Need help selecting a reel for your water truck or equipment? Contact UnitedBuilt through online chat, email parts@unitedbuilt.com, or call 602-253-7750 with your hose dimensions, operating pressure, and available mounting space.
